|
Vermeer SC252 Stump Grinder W/Trailer—Easy to operate—will grind stumps 20” above ground level to 10” below ground level. Stump grinder has auto sweep feature.
|
|
We now have a 2” and 3” mole. Great for boring beneath driveways, sidewalks and roadways. Will run off a tow-behind air compressor.
|
|
Power screed—holds screed bars from 4’ to 12’ - can be used form to form or with wet pads.
|
|
We now carry a larger wet tile saw that can easily cut up to a 31” square tile in one pass and make diagonal cuts on tile up to 22” square. Porcelain Tile, Granite Tile and Marble Tile cut clean with this larger Target wet tile saw.
|
|
The Wacker BPU 2540A reversible vibratory plate offers maximum mobility. Versatile reversible plates ideal for compaction of interlocking paving stones, trenches, landscaping and maintenance. The only plates with a durable, integrated wheel set that provides for maximum built-in mobility. Single lever direction control provides for easy operation.
|
|
The DD-16 Ingersoll Rand compactor weighs in at about 3,000 lbs. Overall length is 80.1”; overall width is 42.7”; and overall height is 88.2”. This 16.9 hp compactor has a vibration frequency of 4000 VPM with a rolling width of 39.4”. Works great in tight places.
|
|
New oil-injected vibratory rammer provides reliable performance by eliminating spark plug fouling and carbon buildup. The no-mix system is an added convenience for operators. This allows for longer and cleaner running times...up to 65 hours on a single tank of oil. The low oil shutdown switch prevents running the rammer without oil for trouble-free operation.
|
|
Dump trailer is 5’ x 8’ x 2’ with electric brakes and 2 5/16” ball required. Capacity is approximately 3,500 lbs. Must have 3/4 ton or larger vehicle.
|
|
The Silver-Line SL-1218 will accomplish the same jobs as the standard rotary polishers but is easier to control. The SL-1218 features a 1HP sealed motor which is protected from dust and fan cooled. This machine's low center of gravity provides you with a machine that is easy to operate, stable and easy to control. The SL-1218 is great for screening floors after sanding and screening and recoating polyurethaned floors as well as scrubbing and polishing waxed floors, and maintaining floor tile.
|
|
The Powernailer® Model 200 mallet activated tongue and groove flooring nailer has been designed to handle the specific needs of installing tongue and groove engineered flooring. This nailer can handle 5/16" to 9/16" tongue and groove engineered flooring using easy-to-change adapter plates and shims. This model uses Powernail's new E-Powercleats®, available in 1", 1-1/4", and 1-1/2" sizes.
|
|
10” Dual Slide Compound Miter Saw with Light. Miter cuts 52º right and 47º left with 9 positive stops at 15º, 22.5º, 31.6º, 45º left or right and 0º. Soft start feature for smooth startups. Electronic speed control maintains constant speed under load for smooth cutting. 13 AMP motor delivers 3,700 RPM. Slide system allows cross cuts up to 12” wide. And more!
|
|
DX 460-F8 Powder Actuated Fastening Tool (Stud Gun) is one tool for all M&E fasteners, such as conduit clips, ECH hangers, X-HS, W-6 threaded studs and more. Good assortment of fasteners with shot.
|
|
The NEW BedBug is the only tool you’ll need to design beautiful landscapes! Create curved or straight bed edges around the the house, pool or trees. An optional CableLayer kit allows you to switch functions in a matter of minutes.
|
|
Purpose built for rigorous tasks on steep slopes, sand and muddy terrain. Smooth and quiet 66 SAE gross hp 4-cylinder turbo diesel. Vertical lift boom provides exceptional load stability, lift-height, and reach.
|
|
Maximum power from a 12" chipper. The BC1000XL combines an impressive 85 HP engine, a large 12" x 17" feed opening, a clutchless PTO and a rubber-torsion suspension for maximum performance. The BC1000XL offers a noise-reducing design and is one of the quietest and most productive chippers in the field.
|
|
KX Series excavators range from 3,000 lbs. to 9,000 lbs. KX-91 and KX-121 feature dual controls, thumb and straight blade. Very user friendly, easy to use.
|
|
For working in extremely tight spaces. A zero tail swing enables rotation within the width of the tracks. Also has thumb attachment.
|
|
Cuts interlocking pavers, stepping stones, brick and cultured stone, wet or dry up to 4" in width. Lightweight for easy transport. Patented dust control vacuum system is standard for dry cutting (less mess). 10" dry cut Diamond Blade.
|
